Our Products
Natural Marble Candle Holder Set for Home Decor and Table Decoration for Interior Decor and Project Furnishing
natural marble candle holder set for hospitality & interior décor
Interior designers and hospitality procurement teams select hand-finished marble candle holder sets to create consistent tabletop aesthetics in guest rooms and dining areas. Each set is finished and inspected for surface evenness and sealed to appropriate standards for decorative use. Request current MOQ and lead time to align production with seasonal display plans.
Material & Finishing Specifications (Marble Set)
- Stone variety: marble family material, typically a white marble variety with stable veining suitable for décor pieces.
- Typical dimensions per holder: 80–120 mm diameter with height 40–80 mm depending on design variant.
- Mohs hardness typically 3–4 indicative of common decorative marbles.
- Porosity typically 0.5–2% indicative after sealing; sealed surface to protect finish.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by set design and finish; request current MOQ for your branded merchandise run.
- Lead Time: Finish and sealing add production time; request lead time for your order quantity and finish specification.
- Supply Capacity: Production scheduled in batch runs to support seasonal retail or hotel rollouts.
- Packaging: Retail-ready boxed sets with protective foam inserts and outer cartons for pallet shipping.
- Quality Check: Each set inspected for finish, dimensions, and sealant adhesion before packing.
Viscon White Granite Gangsaw Slabs for Flooring, Countertops and Wall Cladding for Flooring, Cladding, and Surface Applications
viscon white granite gangsaw slab for flooring & countertops
Countertop fabricators and architectural contractors specify Viscon white granite gangsaw slabs when they need consistent colour and book-matching capability for interiors and façades. These gang-sawn slabs are suitable for polished finishes used in high-traffic flooring and countertop fabrication. Request current MOQ and lead time to match slab yield with your template layout and installation schedule.
Technical Specifications & Grading (Viscon White)
- Typical slab thickness options: 18 mm and 30 mm as commonly supplied for fabrication projects.
- Apparent density typically ~2.65 g/cm³ measured per ASTM C97 for natural stone.
- Water absorption typically ≤0.4% by ASTM C97, suitable for indoor cladding and countertops.
- Compressive strength typically ≥100 MPa indicative of gang-sawn granite performance.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for your required panel yield per project.
- Lead Time: Dispatch timing depends on crate preparation and polishing schedule; request lead time for your batch requirements.
- Supply Capacity: Manufactured in scheduled slab runs to support recurring project deliveries and batch orders.
- Packaging: Crated and fumigated wooden crates with foam packing for slab protection during transit.
- Quality Check: Each slab undergoes visual grading and dimensional inspection prior to crating per ASTM test practice.
Natural Granite Steps for Staircase – Anti-Slip Granite Stair Treads for Indoor & Outdoor Use
anti-slip natural granite stair treads for indoor & outdoor projects
Contractors and landscape architects specify anti-slip natural granite stair treads to deliver durable, low-maintenance steps for public and private projects. Treads are finished to provide slip-resistance suitable for wet conditions and are CNC-cut to consistent thickness and nosing profiles for safe installation. Request current MOQ and lead time to coordinate delivery with on-site installation sequencing.
Technical Specifications & Grading
- Tread thickness typically 20–30 mm according to installation requirements and load conditions.
- Slip-resistance rating commonly targeted R11 per DIN 51130 for flamed or textured finishes.
- Water absorption typically ≤0.5% by ASTM C97, appropriate for exterior use in moderate climates.
- Compressive strength typically ≥110 MPa indicative of granite suitability for stair treads.
Bulk Supply & Logistics Terms
- MOQ: Minimum order depends on tread count and profile; request current MOQ to match flight quantities.
- Lead Time: Production and finish scheduling affect dispatch time; request current lead time for project delivery windows.
- Supply Capacity: Manufactured in slab-to-tread runs coordinated with cutting capacity for recurring orders.
- Packaging: Each tread crate-protected with foam pads and wooden crates for safe transit.
- Quality Check: Dimensional and slip-resistance check performed prior to packing, referenced to the named finish standard.
Decorative Terracotta Jali Block for Ventilation Wall – Clay Breeze Block for Exterior & Interior Design
terracotta jali block for ventilated façades & screens
Architects and landscape designers specify decorative terracotta jali blocks to provide passive ventilation, sunlight modulation, and aesthetic texture for both interior and exterior walls. Blocks offer consistent module sizes for easy installation and can be arranged in repeating patterns to achieve design intent. Request current MOQ and lead time to plan phased façade deliveries.
Material & Dimensional Specifications
- Typical module size options: 200×200×60 mm and 300×300×80 mm modules for wall assembly.
- Dry density typically 1.6–1.9 g/cm³ depending on clay composition and firing profile.
- Compressive strength typically 10–25 MPa indicative for architectural terracotta blocks.
- Water absorption typically 8–16% depending on firing and glazing; outdoor exposure requires appropriate detailing.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by module size and pallet quantity; request current MOQ for façade projects.
- Lead Time: Firing and finishing schedule impacts lead time; request current lead time for phased deliveries.
- Supply Capacity: Production runs coordinated to meet project staging and repeat orders.
- Packaging: Palletized with protective wrapping for safe transit; shrink-wrap and corner protection included.
- Quality Check: Each batch undergoes visual inspection and compressive testing on representative samples before dispatch.
Patagonia Marble Block for Interior Stone and Architectural Projects
patagonia marble block for interior & architectural stonework
Stone fabricators and architectural specifiers source Patagonia marble blocks for polished countertops, wall cladding, and interior architectural features. Blocks are supplied for sawing and slab production with consistent veining and dimensional control. Request current MOQ and lead time so fabricators can schedule gang-saw and polishing batches.
Block Specifications & Grading
- Block sizes supplied per order and quarry yield; typical block weights range by extraction size and geometry.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 for typical marble varieties after standard processing.
- Compressive strength typically ≥70 MPa indicative for many marble blocks used in slabs and architectural features.
Bulk Supply & Logistics Terms
- MOQ: Minimum block order depends on extraction and crate volumes; request current MOQ for planned slab yield.
- Lead Time: Lead times vary with block extraction, sawing schedule, and finishing; request current lead time for project scheduling.
- Supply Capacity: Quarry-block runs are coordinated to meet slab gang-saw schedules and repeat orders.
- Packaging: Blocks are crated and strapped for safe handling and container export.
- Quality Check: Blocks undergo dimensional verification and visual grading before shipment.
Grey Quartz Lumps for Industrial Processing and Material Supply
grey quartz lumps for milling & filler production
Plastics and glass manufacturers source grey quartz lumps as feedstock for milling and blending operations. Lumps provide a coarse starting material for controlled grinding to target particle-size distributions used in glass and filler formulations. Request current MOQ and lead time to align material deliveries with grinding schedules and batch processing.
Material & Size Specifications
- Typical lump size distribution: 8–40 mm suitable for primary crushing and mill feed.
- Bulk density typically ~2.6–2.7 g/cm³ depending on mineral composition.
- Silica content typically high; perform silica assay to confirm specification for glass grades.
- Impurities such as iron oxide typically <1% for higher-grade industrial supplies.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity depends on fraction and container load; request current MOQ for processing volumes.
- Lead Time: Lead time varies with sizing and container preparation; request current lead time for your batch requirements.
- Supply Capacity: Coordinated with plant-side capacity to support recurring orders and scheduled runs.
- Packaging: Jumbo bags or loose container-loads per buyer handling needs.
- Quality Check: Representative sampling and assay reports are provided for lot acceptance prior to shipment.
Natural Sandstone Slabs for Architectural and Landscaping Use
natural sandstone slabs for paving, cladding & landscaping
Landscape architects and contractors select natural sandstone slabs for paving, pool surrounds, and façade cladding owing to their textured cleft surfaces and warm tones. Slabs are sawn or cleft to thicknesses appropriate for pedestrian or vehicular applications. Request current MOQ and lead time to match slab deliveries with paving schedules and installation windows.
Material & Performance Specifications
- Typical slab thickness: 20–40 mm for paving and 30–50 mm for stepped or heavy-load use.
- Slip-resistance rating often provided per DIN 51130 or equivalent testing for finished textures.
- Frost resistance typically expressed as cycles to failure per ASTM C1026 for outdoor suitability.
- Water absorption typically 2–6% depending on stone porosity and finish.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity depends on slab count and crate volumes; request current MOQ for landscape projects.
- Lead Time: Production and finishing schedules determine lead time; request current lead time for staged deliveries.
- Supply Capacity: Stocked at typical inventory levels to support short-notice reorders for repeat projects.
- Packaging: Crated slabs with timber supports and protective straps for containerized export.
- Quality Check: Slabs undergo visual grading and dimensional checks; slip-resistance tests provided where applicable.
Fantasy Brown Marble for Interior Stone and Architectural Projects
fantasy brown marble slabs for countertops & wall cladding
Interior designers and fabricators select Fantasy Brown marble slabs for warm-toned countertops, feature walls, and bespoke architectural elements. Slabs are supplied for polishing and edge profiling with consistent veining for book-matched installations. Request current MOQ and lead time to coordinate slab selection with fabrication schedules.
Slab Specifications & Grading
- Standard slab thicknesses typically 18 mm and 30 mm for countertop and cladding use.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble used in interior applications.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ to match fabrication runs.
- Lead Time: Lead time depends on polishing and finishing schedules; request current lead time for planned deliveries.
- Supply Capacity: Gang-saw slab runs are scheduled to support repeat orders and phased project deliveries.
- Packaging: Crated slabs with foam separators and wooden crates for secure transport.
- Quality Check: Visual grading and dimensional checks are performed before crating and dispatch.
Linea Side Stone Table & Axis Cylinder Marble Stool for Interior Decor and Project Furnishing
linea marble side table & axis cylinder stool for hospitality furnishing
Hospitality and interior fit-out buyers source Linea marble side tables and cylinder stools for curated guestroom and public area furnishings. Each piece is hand-finished or CNC-profiled with sealed surfaces and precise edge details to match interior schemes. Request current MOQ and lead time to coordinate production runs with furniture delivery schedules.
Material & Build Specifications (Linea Collection)
- Exact stone variety: named marble variety or equivalent decorative marble family depending on batch selection.
- Typical stool dimensions: diameter 350–450 mm with heights 420–480 mm for seating variants.
- Mohs hardness typically 3–4 indicative of marble varieties used in décor.
- Porosity typically 0.5–2% after sealing; sealed finish applied to reduce staining risk.
Bulk Supply & Logistics Terms
- MOQ: Minimum order varies by design and finish; request current MOQ for branded furnishing runs.
- Lead Time: Finishing and sealing add production time; request lead time for your order quantity.
- Supply Capacity: Produced in scheduled furniture runs to support repeat hospitality orders.
- Packaging: Retail-ready cartons with foam inserts and wooden crating for bulk shipments.
- Quality Check: Dimensional checks and surface finish inspections are performed before packing.
Morwad White Marble Slabs for Interior Stone and Architectural Projects
morwad white marble slabs for interiors & architectural surfaces
Fabricators and designers specify Morwad white marble slabs for uniform coloration and fine veining suitable for interior countertops and wall cladding. Slabs are gang-sawn and finished to meet polishing tolerances for premium installations. Request current MOQ and lead time to align slab deliveries with fabrication schedules.
Slab Specifications & Grading
- Typical slab thickness options: 18 mm and 30 mm commonly used for interiors.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble used in interior applications.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for project requirements.
- Lead Time: Lead times depend on gang-saw and polishing schedule; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs scheduled to support repeat orders and phased deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Rajnagar White Marble Slabs for Interior Stone and Architectural Projects
rajnagar white marble slabs for interiors & feature walls
Architects and fabricators specify Rajnagar white marble slabs for polished countertops and interior wall cladding due to even coloration and workable veining. Slabs are gang-sawn and finished to meet polishing tolerances for premium interiors. Request current MOQ and lead time to coordinate slab selection with fabrication and installation schedules.
Slab Specifications & Grading
- Standard slab thicknesses typically 18 mm and 30 mm for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative of marble slab performance.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for slab selection.
- Lead Time: Lead times depend on gang-saw and polishing schedules; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs are scheduled to support repeat orders and project deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Banswara White Marble Slabs for Interior Stone and Architectural Projects
banswara white marble slabs for interior countertops & cladding
Interior finishers and architects source Banswara white marble slabs for consistent white backgrounds and subtle veining ideal for countertops and wall cladding. Slabs are sawn and polished with controlled finish tolerances to ensure uniformity across installations. Request current MOQ and lead time to align slab delivery with fabrication schedules.
Slab Specifications & Grading
- Standard slab thickness options typically 18 mm and 30 mm for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after processing.
- Compressive strength typically ≥70 MPa indicative for marble slab usage.
Bulk Supply & Logistics Terms
- MOQ: Minimum order depends on slab count and crate sizing; request current MOQ for your project quantities.
- Lead Time: Lead times depend on gang-saw and polishing schedules; request current lead time for your order.
- Supply Capacity: Gang-saw slab runs scheduled to support repeat orders and staged deliveries.
- Packaging: Foam-separated wooden crates for slab protection during transit.
- Quality Check: Visual grading and dimensional checks performed prior to crating and shipment.
Galaxy Gangsaw Granite for Flooring, Cladding, and Surface Applications
galaxy gangsaw granite block for flooring and cladding
Flooring contractors and façade fabricators specify Galaxy Gangsaw Granite for its dense structure and uniform dark field with reflective mica. Blocks are cut on gang saws to produce yield-optimized slabs for polished flooring, external cladding and countertop fabrication. The material's density and low porosity make it suitable for high-traffic interior surfaces and exterior panels when properly fixed and sealed. Buyers receive technical grading data and cutting yields to plan material usage and estimate slab yields. For project procurement, provide finish and slab-size targets to obtain volume pricing.
Galaxy Granite — Technical Specifications & Grading
- Density approximately 2.75 g/cm³, suited to heavy-duty flooring applications.
- Water absorption ≤0.3% typical for gang-sawn granite after polishing.
- Compressive strength commonly ≥150 MPa for this granite class.
- Slab thickness and finish tolerance: 20mm/30mm with ±2mm tolerance for fabrication accuracy.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab yield and finish selection — request current MOQ for project volumes.
- Lead Time: Production and finishing lead times depend on order size and surface treatment — request current lead time for your order.
- Supply Capacity: Manufactured in scheduled batch runs to support repeat project deliveries and larger consignments.
- Packaging: Slabs crated with protective interleaving and secured on pallets for container shipment.
- Quality Check: Each slab undergoes dimensional and finish inspection prior to packing and dispatch.
Panda White Marble for Interior Stone and Architectural Projects
panda white marble slabs for premium interior finishes
Fabricators and designers choose Panda white marble slabs for refined interiors and feature installations that require consistent background tone and vein character. Slabs are prepared for polishing and template cutting for countertops and wall panels. Request current MOQ and lead time to schedule gang-saw runs and finishing.
Slab Specifications & Grading
- Typical slab thickness: 18 mm and 30 mm commonly supplied for interior applications.
- Apparent density typically ~2.7 g/cm³ measured per ASTM C97.
- Water absorption typically ≤0.4% per ASTM C97 after finishing processes.
- Compressive strength typically ≥70 MPa indicative of marble used for interior surfaces.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by slab count and crate size; request current MOQ for scheduled deliveries.
- Lead Time: Lead times depend on sawing and polishing schedules; request current lead time for project planning.
- Supply Capacity: Gang-saw runs scheduled to support repeat orders and phased deliveries.
- Packaging: Foam-separated wooden crates for secure transit.
- Quality Check: Visual grading and dimensional verification carried out prior to crating.
Marble Designer Dining Table with Sculptural Base for Interior Decor and Project Furnishing
designer marble dining table with sculptural base for hospitality fit-outs
Interior designers and hospitality fit-out teams specify this marble dining table for sculptural statement pieces and project furnishing packages. The table combines a solid stone top with a carved or CNC-shaped base to deliver a monolithic aesthetic. Sourcing focuses on stone variety, top thickness and base engineering to meet seating and load requirements. Buyers should confirm surface finish, edge detailing and on-site handling constraints early in the procurement process. Custom sizing and matched sets are available for coordinated interiors and contract deliveries.
Technical Specifications & Material Details
- Top thickness options typically 30mm or 40mm with CNC-profiled eased edges.
- Tabletop weight and top-load capacity engineered per dimension; typical tabletop density ~2.70 g/cm³.
- Surface finish options: honed, polished, or matte sealed surface for hospitality use.
- Edge and base tolerances manufactured to ±3mm for on-site fit coordination.
Procurement & Logistics Terms
- MOQ: Minimum order quantity depends on size and finish — request current MOQ for project set requirements.
- Lead Time: Production and finishing lead times depend on carving complexity and order volume — request current lead time for your order.
- Supply Capacity: Production batches scheduled to support repeated furnishing orders for hospitality projects.
- Packaging: Crated with internal bracing and protective surfacing for safe transit.
- Quality Check: Each table undergoes visual and dimensional inspection before packing and dispatch.
Panda white marble block for Interior Stone and Architectural Projects
panda white marble block for interior applications
Architects and fabricators specify Panda White Marble Block for interior stonework and architectural elements where consistent veining and a light field are required. Sourced for dimensional block cutting, these blocks support slab production for countertops, wall cladding and bespoke architectural elements. The technical grading emphasizes density and water absorption for fabrication stability. Procurement teams will find project-ready sizing options and documentation to support volume orders. Lead-time and MOQ are handled per project specification; request current MOQ for your required block sizes.
Panda White Marble — Technical Specifications & Grading
- Density approximately 2.70 g/cm³, providing reliable machining behaviour.
- Water absorption ≤0.4% as commonly measured for polished marble slabs.
- Compressive strength typical range ~80–110 MPa for marble varieties of this class.
- Slab thickness options produced from blocks: 20mm, 30mm, cut-to-size tolerances ±2mm.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by block dimensions and finish — request current MOQ for your specific volume requirement.
- Lead Time: Dispatch timing depends on order volume and finishing schedule — request current lead time for your specific order.
- Supply Capacity: Produced in scheduled batch runs to support recurring orders and project replenishment cycles.
- Packaging: Blocks and slabs are crated on wooden skids, banded and protected for container export as required.
- Quality Check: Each shipment undergoes dimensional and visual inspection against grading criteria prior to dispatch.
Exalted Plaza Signature Marble Fireplaces for Architectural and Landscaping Use
marble fireplace surround for architectural interiors
Architects and hospitality designers specify marble fireplace surrounds to create focal hearths in lobbies, reception rooms and residential spaces. Surrounds are fabricated to match chimney apertures and to meet local installation clearances. Finish choices and hearth integration influence thermal detailing and mounting requirements.
Technical Specifications — fireplace surround
- Material: Named marble variety specified per project; slab thickness typically 20–40 mm for facing elements.
- Finish: Polished or honed finish with sealed surface for protection against soot and cleaning agents.
- Tolerance: Fabrication tolerance ±3–5 mm for mating surfaces and reveal details.
- Mounting: Mechanical anchorage details provided for secure wall fixing and hearth integration.
Procurement & Logistics Terms — fireplace surrounds
- MOQ: MOQ varies by finish and complexity; request current MOQ for project quotations.
- Lead Time: Lead time depends on fabrication and finish; request the current schedule for deliveries.
- Supply Capacity: Coordinated batch production to meet phased installation schedules.
- Packaging: Crated with protective layers and palletization for safe shipping.
- Quality Check: Dimensional and visual inspection performed against approved shop drawings before dispatch.
Classic Name Pedestal for Interior Decor and Project Furnishing
stone name pedestal for interior displays and memorials
Museum installers, interior designers and memorial specialists specify classic stone name pedestals for plinth displays and commemorative installations. The pedestal is produced to fixed dimensional tolerances and a selected finish suited to interior or sheltered exterior locations. Designers often pair pedestals with accent lighting or bronze nameplates for installations.
Technical Specifications & Construction — pedestal details
- Material: Natural stone or engineered stone options with polished or honed finish.
- Dimensions: Custom heights and footprint; fabrication tolerance typically ±3–5 mm.
- Load capacity: Engineered to support typical plinth-mounted exhibits; confirm loads for heavy objects.
- Finish treatment: Sealed surface for spill resistance where required.
Procurement & Logistics Terms — name pedestals
- MOQ: MOQ varies by finish and customization; request current MOQ for project pricing.
- Lead Time: Lead time depends on customization and finish; request current lead time for your order.
- Supply Capacity: Produced in scheduled runs to support multi-unit display programs.
- Packaging: Crated with foam protection and wooden frames for safe transit.
- Quality Check: Dimensional and surface inspection against approved samples before dispatch.
Dining Table Set for Interior Decor and Project Furnishing
stone dining table set for interior furnishing
Stone dining table sets crafted from natural slab material are specified for hotels, restaurants and residential projects requiring durable, easy-to-maintain surfaces. Each set combines a precisely profiled stone top with a structural base engineered for load-bearing stability. Furniture fabricators deliver finished tops with edge profiles and sealing applied to buyer specification. Procurement teams should request sample tops and exact dimensions to confirm fit-out and handling requirements. Request current MOQ and lead time to coordinate delivery with installation phases.
Technical Specifications & Grading — Dining Table Set
- Exact stone variety and top thickness should be specified; typical tops supplied at 30 mm with CNC edge profiling for dining use.
- Mohs hardness for tabletop stone typically 5–7 depending on variety; porosity % provided on COA.
- Tabletop tolerances ±2 mm and flatness tolerance to reduce site leveling work.
- Finish options include polished, honed and sealed surfaces suitable for hospitality cleaning regimes.
Bulk Supply & Logistics Terms — Dining Table Set
- MOQ: MOQ depends on model, finish and quantity per crate — request current MOQ for your volume needs.
- Lead Time: Lead time varies by finish and customization — request current lead time for precise scheduling.
- Supply Capacity: Production scheduled to support project batches and staged deliveries.
- Packaging: Palletized crating with foam protection and top supports for safe transit.
- Quality Check: Each tabletop undergoes dimensional and finish inspection prior to packing to meet buyer specifications.
Wall Water Fountain for Architectural and Landscaping Use
wall water fountain stone for landscaping and architecture
Landscape architects and hospitality designers specify wall water fountain stone elements to create vertical water features for public and private projects. These pre-carved or CNC-finished stone panels support water channels and integrated plumbing while providing a decorative cladding surface. Material selection focuses on slip- and frost-resistance where exposure occurs and on finish durability in wet environments. Buyers should confirm plumbing interface dimensions, anchorage details and finish choice before ordering to ensure compatibility with site conditions. Multi-panel sets can be produced and crate-packed for site installation.
Technical Specifications & Material Details
- Panel thickness options typically 30–50mm with CNC-cut plumbing channels.
- Slip-resistance testable surface or textured finish available per project needs.
- Stone density and porosity managed with sealing to reduce water ingress.
- Panel tolerances typically ±3mm to assist with modular installation coordination.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by panel size and finish — request current MOQ for project sets.
- Lead Time: Lead times depend on carving complexity and integration of plumbing features — request current lead time.
- Supply Capacity: Production scheduled to support phased installation deliveries for projects.
- Packaging: Crated with internal bracing and protective surfacing for safe transit.
- Quality Check: Visual and dimensional inspection performed prior to dispatch to ensure alignment with specifications.
Center Table Set Elegant Design – Durable Build – Export Quality for Interior Decor and Project Furnishing
stone center table set for residential and hospitality interiors
Procurement teams and interior fit-out contractors select this center table set for lounge areas, guest rooms, and lobby seating groups where a cohesive stone aesthetic is desired. The set includes surface tops and matching pedestals finished to designer specifications. Design choices affect weight, transport packaging, and on-site installation needs.
Technical Specifications & Material Grades — center table set
- Material: Natural or engineered stone tops; typical thickness range 18–30 mm per tabletop.
- Edge finish: Bullnose or eased edge with polished surface and sealed coating for spill resistance.
- Assembly tolerance: Fabrication tolerance ±3–5 mm on mating surfaces to allow accurate assembly.
- Weight: Unit weights vary by material; confirm slab density for handling plans.
Procurement & Logistics Terms — center table set
- MOQ: MOQ varies by configuration and finish; request current MOQ for bulk pricing and export runs.
- Lead Time: Lead time depends on finish and quantity; request the current schedule for production and dispatch.
- Supply Capacity: Stocked and produced in scheduled batches to support multi-unit project deliveries.
- Packaging: Palletized crate packing with foam and corner protection for international shipments.
- Quality Check: Surface finish and dimensional inspection performed prior to packing to ensure consistency.
Stone Granite Bench for Interior Decor and Project Furnishing
granite bench seating for public and interior projects
Contractors and fit-out teams select granite bench seating for lobbies, corridors and public waiting areas where durability and a natural stone aesthetic are required. Granite benches are specified for resistance to abrasion and for a low-maintenance finish suitable to high-footfall areas. Anchoring and mounting options vary by site conditions and should be confirmed during procurement.
Technical Specifications — Granite Bench
- Material: Granite variety with polished or honed finish; typical thickness 30–50 mm for bench tops.
- Mohs hardness: commonly 6–7 for commercial granites; bulk density approx. 2.65–2.75 g/cm³.
- Water absorption: typically ≤0.4% measured per standard practice for granite materials.
- Mounting tolerance: ±4 mm fabrication tolerance for bracket and support interfaces.
Procurement & Logistics Terms — Bench Seating
- MOQ: MOQ depends on finish and plan quantity — request current MOQ for project quoting.
- Lead Time: Lead time varies by polish and quantity — request current lead time for your order.
- Supply Capacity: Manufactured in planned batch runs to meet recurring facility outfitting schedules.
- Packaging: Wooden crating and palletization with protective separators for safe transit.
- Quality Check: Batch dimensional inspection and surface finish verification prior to dispatch.
Garden scStine sculpture for Architectural and Landscaping Use
garden stone sculpture for landscaping and public spaces
Landscape architects and developers specify garden stone sculptures to create focal features in parks, hospitality gardens and public plazas. Sculptures are supplied as carved stone elements or cast stone reproductions, finished to project tolerances and mounting specifications. Coordination of foundations and anchorage is essential for safe long-term installation in outdoor environments.
Technical Specifications & Fabrication — sculpture details
- Material: Natural stone or cast stone reproduction based on project brief and durability needs.
- Dimensions: Custom sizes available; fabrication tolerance typically ±5 mm depending on scale.
- Finish: Hand-carved or CNC-finished surface options with weather-resistant sealing where required.
- Load/anchor: Anchoring provisions specified per installation with structural fixings.
Procurement & Logistics Terms — sculpture supply
- MOQ: MOQ varies by sculpture size and finish; request current MOQ for project pricing.
- Lead Time: Lead time depends on carving complexity and scale; request site-specific lead times.
- Supply Capacity: Coordinated production schedules to support phased landscape installations.
- Packaging: Timber crating with internal bracing and protective layers for safe transit.
- Quality Check: Visual and dimensional inspection against approved mock-ups before dispatch.
Handcrafted Marble Designer Wash Basin – Stone Bathroom Sink for Architectural and Landscaping Use
handcrafted marble wash basin for bathrooms and hospitality fit-outs
Bathroom fit-out specialists and hospitality designers specify this handcrafted marble wash basin for bespoke vanity installations. Each sink is carved or CNC-finished from selected marble variety and sealed for water resistance. The handcrafted nature supports unique veining patterns and custom apertures for taps and waste fittings.
Technical Specifications — handcrafted wash basin
- Material: Named marble variety when specified; typical bowl thickness 15–25 mm depending on design.
- Porosity: Sealed finish to reduce water absorption; porosity measures typically under 1% in finished pieces.
- Drain aperture tolerance: ±2–3 mm to suit standard fitting interfaces.
- Surface finish: Polished interior with external finish options and protective sealer applied.
Procurement & Logistics Terms — wash basin supply
- MOQ: MOQ varies by finish and customization; request current MOQ for project pricing.
- Lead Time: Lead time depends on carving complexity and finishing; request current lead time for your order.
- Supply Capacity: Produced in batches to support boutique projects and multiple-room rollouts.
- Packaging: Foam-lined crate packing with protective separators for safe transit.
- Quality Check: Visual and dimensional inspections performed against approved samples prior to shipping.
Out Door Water Fountain for Architectural and Landscaping Use
outdoor water fountain stone for architectural landscaping
Landscape architects and contractors specify outdoor water fountain stone for plazas, park features and hotel exteriors where durability and freeze-thaw resistance are required. Panels and carved elements are produced with textured finishes to manage slip performance and with sealed surfaces to reduce water penetration. Material selection prioritizes frost resistance and low water absorption for exposed climates. Buyers should confirm anchorage, pump integration and panel dimensions during procurement to ensure installation compatibility. Multi-panel sets can be scheduled for phased delivery to match installation plans.
Technical Specifications & Performance
- Thickness options 30–60mm with integrated water routing channels as required.
- Designed for outdoor exposure with low water absorption values (typical ≤0.5%).
- Slip-resistant or textured finish options to improve surface safety in wet conditions.
- Manufacturing tolerances ±3mm to support modular installation coordination.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by panel set and finish — request current MOQ for project volumes.
- Lead Time: Lead time depends on carving complexity and frost-treatment schedules — request current lead time.
- Supply Capacity: Production planned to support scheduled deliveries for landscape projects.
- Packaging: Crated panels with protective bracing and shipping supports for outdoor elements.
- Quality Check: Panels undergo dimensional and finish inspection against project specifications prior to dispatch.
Modern Minimalist Stone Console for Interior Decor and Project Furnishing
stone console table for interior decor and hospitality lobbies
Interior designers and project procurement teams specify this modern minimalist stone console table for reception areas, corridors, and lounge spaces where a restrained stone aesthetic is required. The product combines a narrow footprint with engineered stone or natural slab top options to suit high-traffic hospitality and residential projects. Construction choices influence weight and load capacity evaluations, and tempered mounting details reduce on-site installation complexity.
Console Table Specifications — Material & Build
- Material: Natural stone slab top or engineered stone option, thickness typically 18–30 mm depending on top choice.
- Edge finish: CNC-eased or beveled edge with hand-polished surface finish.
- Weight capacity: Designed to support typical display loads; fabrication tolerance ±4 mm on joins.
- Mounting: Concealed bracket fixing with stainless steel anchors for wall-mounted variants.
Procurement & Logistics Terms — Console Table
- MOQ: MOQ depends on finish and top material — request current MOQ for project pricing and lead times.
- Lead Time: Lead time varies by finish and quantity — request current lead time for your order requirements.
- Supply Capacity: Manufactured in planned weekly runs to support repeat order schedules for designers and fit-out contractors.
- Packaging: Packed in foam-protected crates with corner protection for safe transit.
- Quality Check: Each piece undergoes dimensional verification and surface inspection prior to packing.
Backlit Onyx Marble Vanity with Integrated Sink for Interior Decor and Project Furnishing
onyx marble vanity for hospitality & residential fit-outs
Specifiers and project procurement teams use this backlit onyx marble vanity where decorative translucence and integrated functionality are required. The integrated sink reduces installation steps and provides a single-piece aesthetic for hotel bathrooms, high-end residential bathrooms, and showroom fit-outs. The stone’s translucency enables underlighting design without secondary cladding. Buyers can evaluate hardness, porosity and finish when specifying for wet-area use.
Technical Specifications & Grading — Onyx Vanity Details
- Material: Onyx variety with translucent banding, polished finish, thickness typically 20–30 mm.
- Mohs hardness: 3–4 typical for onyx varieties; porosity approximately 0.6–1.2% measured by standard practice.
- Integrated sink tolerance: ±3 mm fabrication tolerance on sink aperture.
- Finish: Polished surface with CNC-edge profiling, sealed for water resistance.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by slab size and finish — request current MOQ for your required volumes.
- Lead Time: Dispatch timing depends on finish and volume — request current lead time for your specific order.
- Supply Capacity: Produced in scheduled batch runs to support recurring projects and repeat orders across hospitality chains.
- Packaging: Crated slab or assembled pallet crates with foam interleaving for safe transit to site.
- Quality Check: Each unit undergoes dimensional inspection and visual grading before packing, verified against supplier specifications.
Marble Designer Bench with Upholstered Seat for Interior Decor and Project Furnishing
designer marble bench with upholstered seat for interiors
Project specifiers choose this marble bench for lobby seating, gallery furniture and hospitality seating where a stone base is paired with a cushioned seat for comfort. The design balances a carved or CNC-finished stone base with a removable upholstered cushion, enabling both aesthetic continuity and practical comfort. Buyers should confirm upholstery specification, mounting details and fire-safety finish requirements during procurement. Units are produced with reinforced base construction to meet seating load requirements and site handling constraints.
Technical Specifications & Material Details
- Base material: named marble variety with density ~2.70 g/cm³ for structural stability.
- Porosity and sealant treatment applied to the seating surface for stain resistance.
- Seat height and cushion thickness produced to buyer specification; tolerances ±5mm.
- Load-bearing construction engineered for typical seating loads per project requirements.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by upholstery and finish — request current MOQ for your project.
- Lead Time: Production lead time varies with upholstery selection and order volume — request current lead time.
- Supply Capacity: Production scheduled to support coordinated deliveries for fit-out projects.
- Packaging: Crated with protective foam and timber bracing for safe transit.
- Quality Check: Visual and dimensional inspection performed prior to packing and shipment.
Travertine Stone Designer Centre Table for Interior Decor and Project Furnishing
travertine centre table for interior decor and project furnishing
Design teams and hospitality buyers select this travertine centre table for its natural texture and warm tones that complement interior schemes. The table blends a solid travertine top with a carved or monolithic pedestal base to create a tactile focal piece. Surface finishes such as honed or brushed conserve the stone's natural character while reducing reflectivity. Project procurement should confirm top thickness and base construction to ensure on-site handling and seating clearance requirements are met. Multi-unit orders can be coordinated for phased fit-outs.
Technical Specifications & Material Details
- Stone type: travertine with typical density ~2.55–2.65 g/cm³ depending on variety.
- Porosity addressed with sealing; typical surface treatment applied before dispatch.
- Dimensions and top thickness per order; tolerances commonly ±3mm for furniture pieces.
- Edge finish and base engineering provided to match installation and load requirements.
Procurement & Logistics Terms
- MOQ: MOQ varies by finish and quantity — request current MOQ for project sets.
- Lead Time: Lead time depends on carving and sealing schedules — request current lead time.
- Supply Capacity: Production runs scheduled to support multi-unit deliveries for projects.
- Packaging: Crated with internal bracing and protective packaging for transit.
- Quality Check: Visual and dimensional checks performed against order specifications prior to shipping.
Black Marble Designer Centre Table for Interior Decor and Project Furnishing
black marble centre table for interiors and projects
Specifiers choose the black marble centre table for its dramatic visual impact and suitability in hospitality and premium residential settings. The product pairs a polished stone top with a sculpted base, offering a monolithic appearance. Surface finish, top thickness and edge detailing are key procurement parameters that affect aesthetic outcome and installation logistics. For contract orders, provide finish and dimensional requirements to obtain project pricing and lead-time estimates. Units are produced with reinforced base construction to satisfy seating and table load expectations.
Technical Specifications & Material Details
- Top thickness commonly 30–40mm with polish or honed finish options.
- Density around 2.70 g/cm³ typical of polished marbles used in furniture.
- Surface sealed to reduce water absorption and enhance stain resistance.
- Manufacturing tolerances typically ±3mm for dimensional coordination on-site.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by finish and batch — request current MOQ for project volumes.
- Lead Time: Lead time depends on carving complexity and order size — request current lead time.
- Supply Capacity: Production scheduled to support multi-unit furnishing orders.
- Packaging: Individually crated with foam protection and timber bracing for export.
- Quality Check: Visual and dimensional inspection completed prior to dispatch.
Designer Stone Bathroom Sink for Architectural and Landscaping Use
designer stone bathroom sink for hospitality and architectural projects
Architects and interior fit-out teams specify designer stone bathroom sinks where a durable, monolithic basin is desired. These sinks are carved from a single stone block or assembled from matched stone pieces and finished to provide a sealed, low-porosity surface suitable for washroom use. Key procurement signals include basin volume, drain interface dimensions and sealing treatment. Custom sizes and integrated countertops are available to align with project layouts. Buyers should confirm drain hardware compatibility and finish choice before ordering.
Technical Specifications & Material Details
- Material: named stone variety with density ~2.6–2.8 g/cm³ depending on selection.
- Porosity managed with sealing; recommended surface treatment applied to reduce staining.
- Drain cut and plumbing interface made to buyer specification; tolerances ±3mm.
- Top thickness and basin depth produced to project dimensions for ergonomic fit.
Procurement & Logistics Terms
- MOQ: MOQ varies by size and finish — request current MOQ for project multiples.
- Lead Time: Lead time depends on carving and sealing schedules — request current lead time.
- Supply Capacity: Production batches scheduled to fulfill multi-unit hospitality orders.
- Packaging: Individually crated with internal supports to protect basins in transit.
- Quality Check: Visual and dimensional inspection carried out prior to packing and dispatch.
Designer Stone Centre Table for Interior Decor and Project Furnishing
designer stone centre table for interiors and project furnishing
Interior designers and project buyers specify this stone centre table for lounge and lobby applications where a sculptural element is required. The table is produced from a named stone variety with finishing and edge detailing to match interior palettes. Procurement focuses on diameter, top thickness and finish to meet design and maintenance criteria. Units can be delivered as single statement pieces or in coordinated sets for larger schemes. Buyers should confirm finish and packing requirements when requesting pricing for multiple units.
Technical Specifications & Material Details
- Stone variety and density specified per selection; typical density ~2.6–2.8 g/cm³.
- Porosity treated with sealing to enhance stain resistance for interior use.
- Top thickness and edge profiling built to buyer dimensions with ±3mm tolerance.
- Finish options: polished, honed, or matte sealed surfaces depending on design intent.
Procurement & Logistics Terms
- MOQ: MOQ depends on finish and volume — request current MOQ for project requirements.
- Lead Time: Lead times vary with finish and carving complexity — request current lead time.
- Supply Capacity: Production scheduled to meet multi-unit order batches for projects.
- Packaging: Crated with foam padding and timber bracing for safe transit.
- Quality Check: Visual, dimensional and finish inspections carried out prior to dispatch.
Designer Stone Bench for Interior Decor and Project Furnishing
designer stone bench for interiors and project furnishing
Interior fit-out teams specify designer stone benches for lobbies, corridors and seating areas where a durable and visually consistent seating solution is required. Options include solid stone benches or stone bases with removable upholstered cushions to improve comfort and maintenance access. Key procurement parameters include bench length, seat height and upholstery specification where applicable. Buyers should coordinate handling, installation and finish selection during the procurement phase to ensure compatibility with site logistics. Multi-unit production and staged deliveries can be scheduled to match installation timelines.
Technical Specifications & Material Details
- Stone variety and density specified per selection; density typically ~2.6–2.8 g/cm³.
- Seat height and bench length produced to buyer dimensions with ±3mm tolerance.
- Porosity addressed with sealing treatments to increase stain resistance.
- Mounting and anchorage points engineered per installation needs to secure benches on site.
Procurement & Logistics Terms
- MOQ: MOQ varies by upholstery and finish — request current MOQ for project requirements.
- Lead Time: Lead time varies with upholstery and carving complexity — request current lead time.
- Supply Capacity: Production scheduled to support multi-unit project deliveries.
- Packaging: Crated with internal supports and protective padding for transport.
- Quality Check: Visual and dimensional inspections are performed prior to packing and dispatch.
Orbita Stone Lounge Chair for Interior Decor and Project Furnishing
orbita stone lounge chair for hospitality and project furnishing
Design-led hospitality and residential projects use the Orbita stone lounge chair as a sculptural seating solution that pairs a solid stone shell with ergonomic contouring. The chair is engineered with internal reinforcement where required and finished to balance tactile comfort and stone aesthetics. Buyers should confirm upholstery or cushion integration, mounting details and finish before procurement to ensure on-site handling and seating compliance. Multi-unit sets can be manufactured and scheduled for phased installation deliveries.
Technical Specifications & Material Details
- Stone shell produced from named variety with density ~2.6–2.8 g/cm³ for structural performance.
- Surface sealed to reduce porosity and improve user maintenance.
- Internal reinforcement and mounting points engineered to meet seating load expectations.
- Manufacturing tolerances typically ±3mm for ergonomic fit and stacking coordination.
Procurement & Logistics Terms
- MOQ: MOQ varies by upholstery and finish — request current MOQ for project quantities.
- Lead Time: Lead time depends on finish and reinforcement requirements — request current lead time.
- Supply Capacity: Production scheduled to support coordinated multi-unit deliveries.
- Packaging: Crated seating units with internal supports and padding for transport.
- Quality Check: Visual and load-bearing checks performed prior to packing and shipment.
Monolith Quad Marble Table for Interior Decor and Project Furnishing
monolith quad marble table for interiors and project furnishing
Design teams and project buyers select the Monolith Quad marble table for its geometric form and single-piece appearance that anchors lounge and reception areas. The table is produced from a named marble variety with precision-cut faces and polished finishes to achieve a seamless monolithic effect. Procurement focuses on top dimensions, polish level and base engineering to ensure safe onsite handling and floor protection. Multi-unit sets can be produced to ensure visual consistency across project spaces. Buyers should confirm finish and required documentation when requesting pricing for multiple units.
Technical Specifications & Material Details
- Material: specified marble variety with density ~2.7 g/cm³ for reliable finish and weight calculations.
- Top thickness typically 30–40mm; machining tolerances ±3mm for production consistency.
- Polished finish sealed to reduce water absorption and staining risks in lounge environments.
- Load-bearing base engineered to meet expected usage and handling constraints.
Procurement & Logistics Terms
- MOQ: MOQ depends on finish and quantity — request current MOQ for project orders.
- Lead Time: Lead times depend on machining and polishing schedules — request current lead time.
- Supply Capacity: Production scheduled to support multi-unit deliveries for fit-outs.
- Packaging: Crated with foam and timber bracing to protect polished surfaces during shipment.
- Quality Check: Visual and dimensional inspection performed prior to packing and dispatch.
White Quartz Snow lumps for Industrial Processing and Material Supply
white quartz lumps for industrial processing
White quartz lumps are supplied as feedstock for glass, ceramics and foundry applications where coarse high-silica material is required. The lumps are sized for efficient crushing and downstream milling and are suitable for high-temperature processing. Industrial buyers can specify size grading and impurity thresholds at inquiry to ensure compatibility with their milling and melting profiles. Supply is organized into container-load batches with crate or bulk-bag packing depending on destination. Request current MOQ and lead time to align shipments with production runs.
Technical Specifications & Grading — White Quartz Lumps
- SiO2 content typically >95% as per standard industrial-grade quartz feedstock specifications.
- Typical lump size range 20–80 mm for crushing to downstream particle-size targets.
- Bulk density approximately 1.6–1.8 g/cm³ depending on porosity and impurity load.
- Impurity oxides (Fe2O3, Al2O3) typically <0.5% combined; LOI indicative of moisture/organics.
Bulk Supply & Logistics Terms — White Quartz Lumps
- MOQ: Minimum order quantity depends on packing format and destination — request current MOQ for exact volume needs.
- Lead Time: Lead time varies with packing and container availability — request current lead time for your required schedule.
- Supply Capacity: Bulk production scheduled to support repeat industrial feedstock deliveries and planned container loads.
- Packaging: Bulk bags or loose-loaded containers depending on destination and handling requirements.
- Quality Check: Batch sampling for SiO2 assay and impurity testing before dispatch, with COA provided.
CaCO3 limestone for Industrial Processing and Material Supply
ground calcium carbonate (caCO3) powder for industrial processing
Manufacturers in plastics, paints and paper use ground calcium carbonate (GCC) as a functional filler and performance additive. This CaCO3 limestone powder is offered in controlled mesh sizes and whiteness grades to match formulation requirements. Typical procurement parameters include particle size (D50 microns), CaCO3 purity percentage and moisture content. Buyers should specify mesh size, required purity and packing format to obtain production-fit quotations. Supply capacity supports scheduled repeat orders for industrial compounding.
Technical Specifications & Typical Parameters
- D50 particle size available across micro ranges (for example 2–5 microns for micronized grades).
- CaCO3 purity commonly ≥95% depending on grade and processing route.
- Moisture content typically controlled below 0.5% for stable handling.
- Bulk density and brightness indexes supplied per grade to support formulation calculations.
Bulk Supply & Logistics Terms
- MOQ: Minimum order quantity varies by mesh and packaging — request current MOQ for production volumes.
- Lead Time: Lead times depend on mesh size and batch scheduling — request current lead time for your order.
- Supply Capacity: Factory runs planned to support repeated monthly or quarterly replenishment for manufacturers.
- Packaging: Available in jumbo bags, bulk bags or sealed cartons per buyer requirement.
- Quality Check: Batch testing for particle-size distribution and CaCO3 purity performed prior to dispatch.
Fish Granite for Flooring, Cladding, and Surface Applications
fish granite slab for flooring & cladding
Fish granite slabs are used where distinctive patterning and textured mineral highlights are desired for floors, countertops and wall cladding. Supplied in polished finish and calibrated slab sizes, these slabs are suitable for architectural and interior applications. Request current MOQ and lead time for project-volume orders to confirm scheduling and pricing tiers. Export documentation and crated packing are available for international shipments.
Fish Granite — Technical Specifications & Grading
- Typical slab thickness: 18 mm nominal suitable for countertop and floor fabrication.
- Density approximately 2.65 g/cm³ for handling and substrate planning.
- Water absorption ≤0.4% per ASTM C97 for granite durability classification.
- Batch COA available for visual grading and dimensional tolerance checks before dispatch.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by slab size and crate configuration — request current MOQ for your project volume.
- Lead Time: Lead time depends on finish and order volume — request current lead time for your order.
- Supply Capacity: Manufactured to a fixed weekly production plan for repeat buyers and scheduled deliveries.
- Packaging: Timber-crated slab packing with separators and protective padding for secure transport.
- Quality Check: Batch-sample testing for absorption and dimensional tolerance is performed prior to packing.
Marqino Black Granite for Flooring, Cladding, and Surface Applications
black granite slab for flooring & cladding
Countertop and flooring fabricators specifying deep-black granite will find this slab suited for high-traffic interior and exterior cladding. The material delivers consistent veining and a polished finish option that simplifies installation and finishing workflows. Architects value its visual depth for facades and feature walls, and contractors choose it for durability under regular maintenance cycles. Procurement teams benefit from clear packing formats and repeat-order handling designed around slab-crate dispatch. Request current MOQ and lead time to align delivery with project milestones.
Technical Specifications & Grading — Black Granite
- Density approximately 2.67 g/cm³ as typical for dense black granites, aiding long-term dimensional stability.
- Water absorption ≤0.3% measured per ASTM C97, suitable for exterior cladding exposure.
- Compressive strength ≥170 MPa consistent with ASTM C170 granite testing guidelines.
- Standard slab thickness options: 20 mm, 30 mm; tolerances ±2 mm per slab edge.
Bulk Supply & Logistics Terms — Black Granite
- MOQ: Minimum order quantity varies by slab size and finish — request current MOQ for your exact volume requirement.
- Lead Time: Dispatch timing depends on selected finish and order volume — request current lead time for your specific order.
- Supply Capacity: Produced in scheduled block-to-slab runs to support recurring orders and multi-phase projects.
- Packaging: Slabs are crated on wooden frames with foam interleaving and steel straps for container export.
- Quality Check: Each crate undergoes visual and dimensional inspection against ASTM-referenced tolerances before dispatch.
Aqua Marqino granite for Flooring, Cladding, and Surface Applications
aqua black granite slab for flooring & cladding
Project buyers specifying a subtle aqua-black tone will find this slab suitable for interior floors, cladding, and bespoke vanities. The material balances low porosity with rich color, allowing polished or honed finishes for different design intents. Fabricators benefit from consistent slab sizing and edge-profiling options that integrate with CNC workflows. Procurement teams may request slab samples and crate plans early to align approvals with production slots. Request current MOQ and lead time to coordinate multi-stage project deliveries.
Technical Specifications & Grading — Aqua Black Granite
- Density approximately 2.66 g/cm³ typical for dense granites, providing stable handling characteristics.
- Water absorption ≤0.33% per ASTM C97 suitable for semi-exposed installations.
- Compressive strength ≥165 MPa as tested per standard granite methods.
- Available slab thickness: 20 mm and 30 mm; tolerance ±2 mm; polished finish yields reflectivity suited to interiors.
Bulk Supply & Logistics Terms — Aqua Black Granite
- MOQ: Minimum order size depends on slab dimensions and finish — request current MOQ for precise planning.
- Lead Time: Lead time varies with finish and order volume — request current lead time for exact delivery windows.
- Supply Capacity: Manufactured in scheduled slab production runs to support repeat and phased orders.
- Packaging: Crated with foam separators and strapped on wooden frames for safe transit.
- Quality Check: Visual grading and dimensional inspection performed before packing against the listed specifications.
Gold Marqino Granite for Flooring, Cladding, and Surface Applications
gold marble-look granite slab for flooring & cladding
This gold-hued marble-look granite offers a warm palette for interiors and select exterior applications. It is produced with finishes that mimic marble veining while maintaining granite's low porosity and strength. Fabricators can request book-matching and specific edge profiles to preserve visual continuity. Project procurement benefits from scheduled slab production and crate-packing protocols that simplify containerized export. Request current MOQ and lead time to coordinate deliveries with phased installations and finishing schedules.
Technical Specifications & Grading — Gold Granite
- Density near 2.66 g/cm³ consistent with medium-heavy granites for dimensional stability.
- Water absorption ≤0.34% per ASTM C97, suitable for semi-exposed façade use with protective detailing.
- Compressive strength ≥162 MPa measured per standard methods for granite materials.
- Offered in 20 mm and 30 mm thicknesses with ±2 mm slab tolerance; polished finish replicates marble sheen.
Bulk Supply & Logistics Terms — Gold Granite
- MOQ: MOQ varies by slab count and finish — request current MOQ for project estimation.
- Lead Time: Lead time depends on finish and crate capacity — request current lead time for exact dates.
- Supply Capacity: Scheduled slab runs support recurring project deliveries and multi-container shipments.
- Packaging: Wooden crating with foam separators and strapping for safe container transit.
- Quality Check: Batch visual grading and dimensional inspection performed before packing per the technical specification above.
Aqua black granite for Flooring, Cladding, and Surface Applications
aqua black granite slab for flooring & cladding
This aqua-black granite slab is specified for interiors that require dark tone with subtle color variation. It suits flooring, cladding and countertop surfaces where a low-porosity stone is preferred. Fabricators value consistent slab thickness and edge-profiling for rapid onsite installation. Procurement teams can request sample slabs and crate plans to verify finish and yield for each project. Request current MOQ and lead time to coordinate deliveries across project phases.
Technical Specifications & Grading — Aqua Black Granite
- Density near 2.66 g/cm³ typical for dense granites, aiding long-term dimensional stability.
- Water absorption ≤0.33% per ASTM C97, acceptable for semi-exposed cladding.
- Compressive strength ≥165 MPa consistent with standard granite test methods.
- Thickness options: 20 mm and 30 mm with ±2 mm tolerance; polished and honed finishes available.
Bulk Supply & Logistics Terms — Aqua Black Granite
- MOQ: Minimum order quantity varies by slab size and finish — request current MOQ for your required volume.
- Lead Time: Lead times vary by finish and order volume — request current lead time for precise planning.
- Supply Capacity: Manufactured in scheduled slab production runs to support phased project deliveries.
- Packaging: Crated with foam separators and strapped for secure container transit.
- Quality Check: Visual and dimensional inspection performed against the Technical Specifications before packing.
Zem Red Granite for Flooring, Cladding, and Surface Applications
zem red granite slab for decorative flooring and cladding
Architects and fabricators specify Zem Red granite slabs for warm-toned flooring, accent walls and countertop applications. The material offers consistent red tones with controlled veining to support continuous visual runs. Slab selection should consider finish and slip-resistance for wet-area installations.
Technical Specifications & Grading — Zem Red granite
- Material: Zem Red granite with consistent hue; typical slab thickness 18–30 mm for interior applications.
- Density: Approx. 2.65–2.75 g/cm³ typical for granite slabs.
- Water absorption: ≤0.4% per standard test practice for granite suitable for flooring.
- Finish: Polished or honed finish with CNC-edge tolerances typically ±3 mm.
Procurement & Logistics Terms — Zem Red slabs
- MOQ: MOQ based on slab size and finish; request current MOQ for project sizing and pricing.
- Lead Time: Lead time depends on finishing and quantity; request current lead time for your order.
- Supply Capacity: Stocked and produced in scheduled batches to support project deliveries.
- Packaging: Crated slab packing with interleaving and palletization for export or domestic transit.
- Quality Check: Visual grading and dimensional inspection performed prior to shipping.
Chima pink granite for Flooring, Cladding, and Surface Applications
chima pink granite slab for decorative flooring and cladding
Fabricators and designers specify Chima Pink granite slabs for warm-toned feature flooring, accent cladding and countertop surfaces. The distinctive pink hue provides a design focal and can be batch-matched for continuous visual appearance. Selection of finish and sealing strategy influences long-term maintenance and suitability for wet zones.
Technical Specifications & Grading — Chima Pink granite
- Material: Chima Pink granite with consistent color; typical slab thickness 18–30 mm for interior applications.
- Density: Approx. 2.60–2.75 g/cm³ typical for commercial granites.
- Water absorption: ≤0.5% per industry practice for decorative granite slabs.
- Finish: Polished or honed finish with CNC-edge tolerances typically ±3 mm.
Procurement & Logistics Terms — chima pink slabs
- MOQ: MOQ based on slab dimension and finish; request current MOQ for accurate pricing.
- Lead Time: Lead time depends on finish and order size; request current lead time for your order.
- Supply Capacity: Stock and batch production schedules support project deliveries and repeat orders.
- Packaging: Crated slabs with interleaving and palletization for safe transport.
- Quality Check: Visual grading and dimensional inspection performed before dispatch to ensure batch consistency.
Viscon white for Flooring, Cladding, and Surface Applications
viscon white granite slab for bright flooring and cladding
Designers and fabricators specify Viscon White granite slabs for light-toned flooring, curtain walls and kitchen countertops where a clean, bright aesthetic is required. The stone’s consistent tone supports continuous visual runs and reflective interior schemes. Select finish and jointing details carefully for wet-area and external cladding applications.
Technical Specifications & Grading — Viscon White granite
- Material: Viscon White granite with even tone; typical slab thickness 18–30 mm for interiors.
- Density: Approximately 2.65–2.75 g/cm³ typical for granite slabs.
- Water absorption: ≤0.4% per standard test practice for durable surface selection.
- Finish: Polished or honed finishes available with CNC-edge tolerances ±3 mm.
Procurement & Logistics Terms — Viscon White slabs
- MOQ: MOQ depends on slab size and finish; request current MOQ for project pricing.
- Lead Time: Lead time varies by finish and quantity; request current lead time for your order.
- Supply Capacity: Stocked and batch-produced to support scheduled deliveries for large projects.
- Packaging: Crated slab packing with interleaving and palletization for export.
- Quality Check: Visual grading and dimensional inspection performed prior to shipping.
Alaska Gold Granite for Flooring, Cladding, and Surface Applications
alaska gold granite slab for flooring, cladding and countertops
Architects and fabricators select Alaska Gold granite slabs for warm-toned flooring, feature cladding and countertop surfaces that benefit from lively mineral tones. The stone’s consistent patterning supports continuous visual runs when batch-matched. Consider finish and sealing for exterior cladding and wet-area flooring applications.
Technical Specifications & Grading — Alaska Gold granite
- Material: Alaska Gold granite with warm mineral tones; typical slab thickness 18–30 mm for interior use.
- Density: Approximately 2.65–2.75 g/cm³ typical for granite slabs.
- Water absorption: ≤0.5% per normal practice for architectural granite slabs.
- Finish: Polished or honed finish with CNC-edge tolerances typically ±3 mm.
Procurement & Logistics Terms — alaska gold slabs
- MOQ: MOQ depends on slab dimensions and finish; request current MOQ for project pricing.
- Lead Time: Lead time varies by finish and order size; request current lead time for your order.
- Supply Capacity: Stock and batch production schedules support scheduled deliveries for large projects.
- Packaging: Crated slab packing with interleaving and palletization for exports.
- Quality Check: Visual grading and dimensional inspection performed prior to shipping.
P White for Flooring, Cladding, and Surface Applications
p white granite slab for flooring & cladding
Project developers and fabricators specify P White granite slabs for neutral-surface applications where a subtle texture and consistent finish are required. The slabs are supplied polished for interior use and are suitable for countertops and wall cladding. Request current MOQ and lead time for project-volume orders to confirm scheduling and pricing tiers. Export documentation support is available for container-load shipments to international projects.
P White Granite — Technical Specifications & Grading
- Typical slab thickness: 18 mm nominal, suitable for standard countertop and floor fabrication.
- Density approximately 2.65 g/cm³ for handling and substrate planning.
- Water absorption ≤0.4% per ASTM C97 for granite finish and durability assessment.
- Batch COA provided for visual grading and dimensional tolerances prior to dispatch.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies with slab dimensions and crate counts — request current MOQ for your specific volume requirement.
- Lead Time: Lead times depend on finish and volume — request current lead time for your order details.
- Supply Capacity: Coordinated with plant-side capacity to fulfil recurring volume commitments for project buyers.
- Packaging: Timber-crated slab packing with separators for secure container loading and transit.
- Quality Check: Verification against COA and dimensional check carried out before packing and dispatch.
Tigerskin Granite for Flooring, Cladding, and Surface Applications
tigerskin granite slab for bold flooring & cladding
Tigerskin granite slabs offer a pronounced pattern and contrasting veining suitable for statement floors, reception areas and decorative façades. Supplied in a polished finish and calibrated slab format, these stones are cut for seamless book-matched installations. Request current MOQ and lead time for project-volume orders to confirm scheduling and pricing tiers. Export documentation and packing options are available for container shipments.
Tigerskin Granite — Technical Specifications & Grading
- Typical slab thickness: 18 mm nominal for countertop and wall use.
- Density about 2.65 g/cm³ for handling and substrate considerations.
- Water absorption ≤0.4% per ASTM C97 for granite durability classification.
- Batch COA includes visual grading and dimensional tolerances before dispatch.
Procurement & Logistics Terms
- MOQ: Minimum order quantity varies by slab size and crate count — request current MOQ for your specific volume requirement.
- Lead Time: Lead time depends on slab finish and order size — request current lead time for your order details.
- Supply Capacity: Produced in scheduled batch runs to support recurring orders and project timelines.
- Packaging: Timber-crated slab packing with protective separators for safe container loading.
- Quality Check: In-process checks and batch COA verification ensure visual grade and dimensional tolerances prior to packing.
